Page 1 of 1
Graphic Issue: Great Flag beheaded my Canoneer
Posted: Fri Jan 08, 2021 8:11 am
by BeanofKnowledge
The top part of the elite Canoneer doesn't show when standing in front of a great flag:
http://imgur.com/a/PtmgoRL
Re: Graphic Issue: Great Flag beheaded my Canoneer
Posted: Sat Jan 09, 2021 9:11 am
by Endru1241
Does it happen every time?
What OS do you have?
For me on Android 10 it works normally.
Re: Graphic Issue: Great Flag beheaded my Canoneer
Posted: Sun Jan 10, 2021 5:03 pm
by Stratego (dev)
i dont understand are they occupying same tile?
Re: Graphic Issue: Great Flag beheaded my Canoneer
Posted: Mon Jan 11, 2021 3:01 am
by Hyuhjhih
I have seen these things before. The cases are
1. Some terrain structures, like moat and bridge , behind a tower ( fortress) and overlapping the tower sprite while it is not supposed to.
2. Archers head while standing infront of factory building get overlapped by it.
3. Some terrains in map editor is not merged with background and it appears as distinct sprites.
4. Viking berserk while in berserk mode , if entered into a ruined fortress appear overlapping the ruined fortress.
These have been occured to me as atmost a rare exception like once in a thousand chance. I only noticed it these four times only. And it was while I was using my old phone (kitkat 4.4.2) . And i haven't yet seen it in my new android 10 . So i declare it might be some sort of a glitch within lower androids.
Re: Graphic Issue: Great Flag beheaded my Canoneer
Posted: Mon Jan 11, 2021 12:41 pm
by BeanofKnowledge
I have a pretty old phone running Android 8, so that's probably it
Re: Graphic Issue: Great Flag beheaded my Canoneer
Posted: Mon Jan 11, 2021 12:43 pm
by BeanofKnowledge
Stratego (dev) wrote: ↑Sun Jan 10, 2021 5:03 pm
i dont understand are they occupying same tile?
Yes, the Canoneer is on the same tile as the great flag
Re: Graphic Issue: Great Flag beheaded my Canoneer
Posted: Mon Jan 11, 2021 1:09 pm
by Hyuhjhih
Wait a minute, this is completely something else than what i said. And how on Earth is this getting in the same tile? I haven't seen two units occupy same tile unless it is a CARRIER and as far I know, great flag in not a carrier.
Re: Graphic Issue: Great Flag beheaded my Canoneer
Posted: Mon Jan 11, 2021 3:48 pm
by Endru1241
Hyuhjhih wrote: ↑Mon Jan 11, 2021 1:09 pm
Wait a minute, this is completely something else than what i said. And how on Earth is this getting in the same tile? I haven't seen two units occupy same tile unless it is a CARRIER and as far I know, great flag in not a carrier.
It is a carrier.
Flag can carry 1 unit, but doesn't hide it and allows shooting normally.
It was made like that to represent, that it doesn't take much space on a tile and people can be around it.
And it would still be the same issue - graphic overlay (the part that goes on higher tile) not keeping proper order of display (z parameter).
By the way - which archer unit was getting overlapped?
Regular 1 tile "Archer"?
BeanofKnowledge wrote: ↑Mon Jan 11, 2021 12:41 pm
I have a pretty old phone running Android 8, so that's probably it
Android 8 is not so old. At least not comparing to 4.4.
While current game is on sdk for 10.0, version 8 shouldn't have any issues, as it was working fine for many of us on that system before.
I think I may have seen something similar, but it was years back either on android 6.0 with miui or 4.4.2
The most important question though is - does it happen always? Or commonly? Or it was one time only?
Re: Graphic Issue: Great Flag beheaded my Canoneer
Posted: Mon Jan 11, 2021 11:09 pm
by Stratego (dev)
Endru1241 wrote: ↑Mon Jan 11, 2021 3:48 pm
Hyuhjhih wrote: ↑Mon Jan 11, 2021 1:09 pm
Wait a minute, this is completely something else than what i said. And how on Earth is this getting in the same tile? I haven't seen two units occupy same tile unless it is a CARRIER and as far I know, great flag in not a carrier.
It is a carrier.
Flag can carry 1 unit, but doesn't hide it and allows shooting normally.
It was made like that to represent, that it doesn't take much space on a tile and people can be around it.
And it would still be the same issue - graphic overlay (the part that goes on higher tile) not keeping proper order of display (z parameter).
By the way - which archer unit was getting overlapped?
Regular 1 tile "Archer"?
BeanofKnowledge wrote: ↑Mon Jan 11, 2021 12:41 pm
I have a pretty old phone running Android 8, so that's probably it
Android 8 is not so old. At least not comparing to 4.4.
While current game is on sdk for 10.0, version 8 shouldn't have any issues, as it was working fine for many of us on that system before.
I think I may have seen something similar, but it was years back either on android 6.0 with miui or 4.4.2
The most important question though is - does it happen always? Or commonly? Or it was one time only?
"Flag can carry 1 unit, but doesn't hide it and allows shooting normally"
i think we ned to figure out something else, no other unit should "not hide" than bridge like things (that look good under other unit)
- so either flag should hide the unit
- on not being able to carry
- or keeping this but making the image looking good with every unit type (eg. an elepant
- i am not talking about overlapping problem
overlaping problem is a known one as Z order of overlapped parts is not changing as unit move up and down the map (so it is in creation order of the sprite)
Re: Graphic Issue: Great Flag beheaded my Canoneer
Posted: Tue Jan 12, 2021 7:30 am
by makazuwr32
Flag is capturable i think (at least in aof) and that is why i think it must have carry cap.
Re: Graphic Issue: Great Flag beheaded my Canoneer
Posted: Sun Jan 17, 2021 12:35 pm
by BeanofKnowledge
Endru1241 wrote: ↑Mon Jan 11, 2021 3:48 pm
Hyuhjhih wrote: ↑Mon Jan 11, 2021 1:09 pm
Wait a minute, this is completely something else than what i said. And how on Earth is this getting in the same tile? I haven't seen two units occupy same tile unless it is a CARRIER and as far I know, great flag in not a carrier.
It is a carrier.
Flag can carry 1 unit, but doesn't hide it and allows shooting normally.
It was made like that to represent, that it doesn't take much space on a tile and people can be around it.
And it would still be the same issue - graphic overlay (the part that goes on higher tile) not keeping proper order of display (z parameter).
By the way - which archer unit was getting overlapped?
Regular 1 tile "Archer"?
BeanofKnowledge wrote: ↑Mon Jan 11, 2021 12:41 pm
I have a pretty old phone running Android 8, so that's probably it
Android 8 is not so old. At least not comparing to 4.4.
While current game is on sdk for 10.0, version 8 shouldn't have any issues, as it was working fine for many of us on that system before.
I think I may have seen something similar, but it was years back either on android 6.0 with miui or 4.4.2
The most important question though is - does it happen always? Or commonly? Or it was one time only?
I ran a few tests, and it's still happening, other units are also affected :
http://imgur.com/a/j5DpylR
Re: Graphic Issue: Great Flag beheaded my Canoneer
Posted: Sun Jan 17, 2021 12:44 pm
by Stratego (dev)
it is a known problem as i wrote above.